Do you want to help support HBC? You can contribute through e-transfer to marc@huntingbc.ca or via PayPal

Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Excalibur Lumenok WARNING

  1. #1
    Join Date
    Nov 2009
    Location
    Victoria
    Posts
    1,261

    Excalibur Lumenok WARNING

    Went all out and bought a few Lumenok crossbow bolts for my Equinox this year. At $15 each (NOT including broadhead!) I figured I'd save them for hunting and use my standard bolts for target practise and siting in. Fortunately, I couldn't resist and had to try one out yesterday only to find I was almost missing the target at 50 yards.... A few shots confirmed this and back to the standard bolts; whack, whack, whack, 3 in the bull. A little thought and "Hmmm there must be a battery in these things, that must weigh something...." So even though they look exactly the same as standard Excalibur bolts, THEY ARE NOT. My powder scale confirmed that the Lumenoks are 16 grains heavier than the standard bolt. Not much you say? This equals about 6 inches at 50 yards, a swing and a miss on a blacktail. Another lesson learned...
    JP

  2. Site Sponsor

  3. #2
    Join Date
    Feb 2007
    Location
    Recent Nanaimo transplant to Williams Lake
    Posts
    2,145

    Re: Excalibur Lumenok WARNING

    I used standard and the luminoc arrows in my Excalibur Phoenix and they shot exactly the same at 50 yards, still 2" grouping and same elevation on target. Might have been a faulty batch you got not set to exact weights. Good thing you found out early. Did you contact them about it ?
    "People who know the least always argue the most."

    "You should not use a rifle that will kill an animal when everything goes right, you should use one that will do the job when everything goes wrong."

  4. #3
    Join Date
    Oct 2010
    Location
    East Kootenays
    Posts
    1,374

    Re: Excalibur Lumenok WARNING

    So is it the actual bolt that weighs more or just the nocks? Assuming the bolt shafts are the same type, length and weight then you would want to make sure the Lumenoks themselves weigh the same as your standard nocks. Not all nocks weigh the same.
    Yup, that coiler is a personal best...

  5. #4
    Join Date
    Nov 2009
    Location
    Victoria
    Posts
    1,261

    Re: Excalibur Lumenok WARNING

    I assume its the weight of the battery that makes the difference. I did not disassemble the bolts to weigh the nocks separately but weighed the whole bolt assembly (without tips). The nocks are 1/4" longer than the standard aluminum nocks but they are plastic so I dont think there would be a significant difference in weight there. They do however make the overall length 1/4" more. Since they are sold "off the shelf" specifically for excalibur crossbows I assumed they would shoot the same. I'll try and find contact info and see what they say.
    JP

  6. #5
    Join Date
    Oct 2010
    Posts
    1,822

    Re: Excalibur Lumenok WARNING

    if you contact them, please share what they say, interesting topic...do they advertise to shoot the same?

  7. #6
    Join Date
    Oct 2010
    Location
    East Kootenays
    Posts
    1,374

    Re: Excalibur Lumenok WARNING

    I see. They should specify that they are a different weight if that's the case. I wonder if Excalibur assembles them?
    Yup, that coiler is a personal best...

  8. #7
    Join Date
    May 2012
    Location
    Sooke
    Posts
    313

    Re: Excalibur Lumenok WARNING

    I've used them with no problems

  9. #8
    Join Date
    Nov 2005
    Posts
    2,312

    Re: Excalibur Lumenok WARNING

    its a good thing you decided to shoot them eh, i know that each one is heavier and should be a difference on the target, the ones i make were about 10 grains difference for my bow and then i got down even more but cant remember the exact difference but even on a few shows on TV they showed the difference between lumenok and normal noks after Chipper missed a great buck.

  10. #9
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    15,794

    Question Re: Excalibur Lumenok WARNING

    Factory Arrows?

    I shoot Custom Black Eagle Executioners from my Matrix 380, with Luminoks. The Maker strongly suggested I go with heavier front Brass Inserts to maintain FOC due to the Luminoks being heavier than the standard aluminum nocks.
    These things shoot 1.5" groups at 40 yards, and less than 2" at 60 all day long.

    Are the front inserts aluminum in those you got??

    Wondering...
    Nog
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  11. #10
    Join Date
    Dec 2007
    Location
    is everything!
    Posts
    2,837

    Re: Excalibur Lumenok WARNING

    I'm glad I saw this post. I too purchased some luminoks for my Equinox. Haven't shot one yet, but now I will have to go see how they fly compared to the standard bolts, don't want to miss that BIG buck I'm after.
    caddisguy "I worry about predators wanting to eat me or bucks trying to take my manhood. "How was your hunting trip honey" ... "wahh I don't want to talk about it... sob ""

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •