Re: Adjusting draw weight
If you want to make sure everything is even, tigten the bolts all the way then work back from there obviously using equal number of turn on each limb.
One thing to watch for if you are very particular about your draw length being perfect is that as you turn the bow up, you will decrease the draw length and brace height of the bow. A 10lb adjustment could be up to a 1/4" draw length. One thing to note is this is usually much more pronounced on a bow with more "upright" limbs than it will be on a parallel limb bow.
Hope this helps
Chris
"Do not go where the path may lead,
go instead where there is no path and leave a trail."
Emerson