scope options for 10/22 ruger

[bcfirefly]

Looking to get a scope that is on the cheaper side for my ruger 10/22. Can't seem to get accurate enough for grouse head shots after 40+yrds.
Figured this might be the best spot to ask as it seems more like a new hunter question.
Thanks in advance

[Steeleco]

I've got a Leupold VXII 2x7x33 on mine 10-22 It is little more expencive than many other units, but it's worth it. Have you done any mods to your trigger/action. It makes a huge difference in it's shoot-ability.

[bcfirefly]

what type of mods do you recommend? pretty much put all my resources to the big rifle and having fun plinking. Will check out scope options tomorrow when i hit the stores

[Steeleco]

Look for some quality used items here and on Gunnutz. I got mine for $200

The mods can be done by anyone with a minimal mechanical inclination. Have a read on www.rimfirecentral.com I've got my trigger down to a even 2lb and it cycles even the softest rounds no issues.

[landphil]

I'm running a Tasco 2.5-10x42 target scope on mine, on one hand its a cheap piece of @#%& but on the other hand its working pretty well for a $100 ish dollar tube and hasn't given trouble in 1000+ rounds of high recoiling .22LR long range precision shooting.:-D Get a tuffer buffer or other polymer bolt stop to take the jarring slap out of the action and any optics will surely appreciate it long term too.

[2chodi]

Both of these scopes have proven good results on Ruger 10/22s for around $200. The Nikon is actually a rimfire scope, but both have parallax adjustment down to under 10 yards.

http://bushnell.com/hunting/rifle-scopes/legend-ultra-hd/3-9x-40mm-multi-x

http://www.nikonsportoptics.com/Nikon-Products/Scopes/6734/ProStaff-Target-EFR.html

[Singleshotneeded]

what type of mods do you recommend? pretty much put all my resources to the big rifle and having fun plinking. Will check out scope options tomorrow when i hit the stores

Get a "match sear" online for your trigger, makes it smoother and tons lighter for about $30. You can find several good mods for mini dollars on the net, the 10/22 is a dream to customize.

[ActionJackson017]

I have a Ruger 10/22 as well - and had terrible accuracy problems with the original Tasco I put on it. It was a complete waste of time. I picked up a Leupold VX-1 rimfire 2-7x28mm and it's not even close to how much better this scope is.

I know this has been said before on this forum and I now believe it ~ better to put a $300 scope on a $100 rifle, than the other way around.

[Iron Glove]

I've got everything from $50 Tasco's to $300 Leupolds on my numerous rim fires.
The rimfires are everything from 50 year old Mossbergs to 10/22's to high price CZ's.
The $50 Tasco works just fine on my 10/22 for grouse hunting.
My suggestion, try a $50 scope, see how it works for you before you spend big $$.
Buy the scope @ CT and take it back if you don't like it, no risk involved.

[kdw]

I just got this Nikon scope and I can't complain. The glass is really clear.

http://www.grouseriver.com/Nikon_Pro_Staff_II_Rimfire_4_x_32_Riflescope_p/opt-000516.htm

[hare_assassin]

I've got everything from $50 Tasco's to $300 Leupolds on my numerous rim fires.
The rimfires are everything from 50 year old Mossbergs to 10/22's to high price CZ's.
The $50 Tasco works just fine on my 10/22 for grouse hunting.
My suggestion, try a $50 scope, see how it works for you before you spend big $$.
Buy the scope @ CT and take it back if you don't like it, no risk involved.

I would say the same thing, except I would set the dollar value a bit higher; maybe around $80. The extra $30 should get you 40mm (brighter) and a bit sharper image.

[Jagermeister]

You can get a 3X9X40 by Bushnel for about $50 and change at WSS in Kamloops.

[KC-Limo]

I got a Vortexx Crossfire from Nechako Outdoors in PG. $149 I think. Great glass. Really happy with it.