View Full Version : Xbolt trigger Adjustment
Backwoods
01-26-2017, 02:14 PM
Hey guy wonder if there's any of you that has played around with the xbolt triggers, trying to find a video on it or some info.
BRvalley
01-26-2017, 02:23 PM
very simple, remove the bottom metal (don't even need to pop the stock off) and you'll see the adjustment screw immediately in front of the trigger, mine was covered in red thread locker
this help? continues on following pages
https://www.manualslib.com/manual/407917/Browning-X-Bolt.html?page=24
BRvalley
01-26-2017, 02:28 PM
you won't get the pull any lower than 3 lbs, basically as advertised, I'd prefer a bit lighter but it does break very nicely, I'm happy enough with it so I didn't spend much time trying to find a lighter spring, doesn't seem to be any aftermarket spring kits for them yet.....ernie the gun smith.com used to sell a spring kit to lower the pull, but stopped, apparently because customers couldn't get the trigger back together lol....his website still shows brief directions if you want to go that route
VLD43
01-26-2017, 02:41 PM
Don't know how handy you are, but this will do it for you http://erniethegunsmith.com/catalog/i187.html
jackthebear
01-26-2017, 02:43 PM
If you want it down to 2lbs, take it to a reputable gunsmith. I had mine done and he had to shorten the spring and grind the sear down a bit. It was awesome! Completely safe and a pleasure to shoot!
Backwoods
01-26-2017, 03:18 PM
Awesome thanks guys!
swampthing
01-26-2017, 07:30 PM
I lightened mine up with the adjustment and still too stiff. Will drop at corlanes next time I am through to see bout a 2lb tuneup!
bridger
01-26-2017, 07:38 PM
I lightened mine up with the adjustment and still too stiff. Will drop at corlanes next time I am through to see bout a 2lb tuneup!
Had mine done at Corlanes last spring. Took Greg about 10 minutes. Easy Peasy
Backwoods
01-27-2017, 06:09 PM
Had mine done at Corlanes last spring. Took Greg about 10 minutes. Easy Peasy
Awesome good to hear!!!
swampthing
01-29-2017, 09:33 AM
Great to hear bout greg and corlanes!
Backwoods
01-29-2017, 01:17 PM
Weighed it last night before adjusting, was set from factory was around 4lbs as stated from browning, gotnit down to 3.3lbs, a bit better, every bit makes a difference, still might have to swing into corlanes haha
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.