NorfolkBoy
03-26-2014, 02:55 PM
I wanted to share some pictures of my primitive arrows. I have a full set of build along pic's, but I don't know the etiquette, is it considered spamming to have multiple posts filled with images?
For now, I'd like to present a set I'm currently building out of Budleja.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t31.0-8/q79/s720x720/1669918_10152284074409558_1960267849_o.jpg
A dozen shafts cut and left to dry after being steamed straight while green.https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/t31.0-8/p180x540/1956812_10152284077954558_279615299_o.jpg
Oiling the shafts with boiled linseed.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-frc1/t31.0-8/p180x540/1939819_10152284079909558_245276069_o.jpg
Top Three Arrow shafts are spined for my 60lb Recurve, bottom four are for my 50lb longbow. Will hopefully have much bigger flint arrowheads on the recurve sized shafts.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/t31.0-8/q71/s720x720/1781613_10152284083744558_615053431_o.jpg
One of the heads for the lighter spined shafts. I'm from norfolk, so flint is kind of in the blood. I'm spoilt when it comes to good knappable material.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc1/t1.0-9/1978756_10152286746919558_885842072_n.jpg
The above arrowhead finished and fitted to an arrow shaft, seated on cherry resin and bound on with red deer sinew. Flights are pheasent and wood pigeon, also tacked in place with cherry resin and bound on with sinew. Knock is a simple one, rather than trying to do a horn insert.
Anyone have any advice to an amateur fletcher? I'd love to hear what you think and any suggestions or comments.
For now, I'd like to present a set I'm currently building out of Budleja.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t31.0-8/q79/s720x720/1669918_10152284074409558_1960267849_o.jpg
A dozen shafts cut and left to dry after being steamed straight while green.https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/t31.0-8/p180x540/1956812_10152284077954558_279615299_o.jpg
Oiling the shafts with boiled linseed.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-frc1/t31.0-8/p180x540/1939819_10152284079909558_245276069_o.jpg
Top Three Arrow shafts are spined for my 60lb Recurve, bottom four are for my 50lb longbow. Will hopefully have much bigger flint arrowheads on the recurve sized shafts.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/t31.0-8/q71/s720x720/1781613_10152284083744558_615053431_o.jpg
One of the heads for the lighter spined shafts. I'm from norfolk, so flint is kind of in the blood. I'm spoilt when it comes to good knappable material.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc1/t1.0-9/1978756_10152286746919558_885842072_n.jpg
The above arrowhead finished and fitted to an arrow shaft, seated on cherry resin and bound on with red deer sinew. Flights are pheasent and wood pigeon, also tacked in place with cherry resin and bound on with sinew. Knock is a simple one, rather than trying to do a horn insert.
Anyone have any advice to an amateur fletcher? I'd love to hear what you think and any suggestions or comments.