Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Thread: Skull Work

Hybrid View

  1. #1
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Cool Skull Work

    Didn't rightfully know just which category to put this one in? But since it's rather picture heavy, figured here is as good as any...

    My Partner and I have accumulated a fair pile of head bones over the years, and with no steelhead in the river to entertain us, decided to finally get around to cleaning a few up...

    There are several way to do this of course. Taxidermist is the easiest, but little entertainment value in that for us. Dermestid Beetles are the general preferred route, but neither of us want the hassle (and smell) that goes hand in hand with them. So, we settled on the scrape, simmer, scrape, degrease and whitening process.

    Two ways to prep the skull. Easiest is to simply bury the bugger in the yard where your mutt won't dig it up, and fetch it out a few months or so later. The bugs will take care of a LOT of the prep for you. Only caution here is you may have to look hard to find a few teeth should they fall out.

    Here's a medium sized Black Bear just out of the ground:





    The other was is to cut as much of the meat and cartilage off as you can:







    Continued...
    Last edited by IronNoggin; 04-04-2013 at 06:38 PM.
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  2. Site Sponsor

  3. #2
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Arrow Re: Skull Work



    Still a fair way to go with the ol' Buffalo, but he needs to thaw a little more before that can happen.

    We wash the dirt skulls carefully, and then treat them much the same as the the skinned ones.

    Into the big Stainless pot overnight:



    Couple Blacktail skulls peaking out of that. We NEVER allow the water to boil, simply get fairly warm and maintain that overnight. Next day, the nitty-gritty stuff starts:



    That's a Dall Ram almost ready for the next step, and a non-typical Blacktail my Partner is working on. Carefully remove all the bits that ain't bone. Time consuming and picky work, but eventually worth it.

    Then it's back to the simmer pot for another over-nighter. We add a good amount of dish detergent and replace the water at this point to help get rid of some of the grease:



    After another cleaning session the next day (spoons, knives, picks and hard-bristle brushes) we let them dry out overnight before degreasing.

    To degrease, we put the skulls inside a tough garbage bag, add sufficient sudsy ammonia so that when the bagged skull is lowered in a tub full of water the ammonia drowns the entire skull.

    Here's a Polar Bear and a Black Bear in the de-greasing tub:



    That process can take a couple or even three days before all the grease is out. Ammonia doesn't seem to affect the bones at all, so we've been erring on the side of longer to ensure all the grease is gone. With very oily skulls (Polar Bears!!) we had to change the ammonia a few times for it to do it's job.

    Continued...
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  4. #3
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Arrow Re: Skull Work

    After de-greasing is complete, we wash the skulls thoroughly with sudsy water & rinse well. Then let them dry once again before going into the whitening tank.

    The most common method is to immerse the skull in hydrogen peroxide for this step, and something we have done a fair amount of. But with so many projects, the associated cost was starting to be noticeable, so we are experimenting with non-chlorinated swimming pool Shock Treatment. And once again we use the bag method and submerge in a tank of water.

    Here's the elk waiting for the whitening:



    And now bagged with the shock treatment to whiten up:



    That process can take up to a couple days before it is satisfactory...

    Continued.
    ..
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  5. #4
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Thumbs up Re: Skull Work

    We only currently have one skull that has basically finished whitening at this point (with several more on the go).

    Here's what the Big Polar Bear looking like before the process - the end result of sitting 20 years in the shed:







    And what he looked like yesterday having the whitening agent scrubbed away:



    Coming along nicely!!

    This was a HUGE Old Boar with many cracked / broken teeth and battle scars all over. He will certainly be a pleasant addition to my cave soon!!

    Continued
    ...
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  6. #5
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Arrow Re: Skull Work

    Couple more of the impending projects:

    Fallow Deer & last year's bow Muley:



    SlobberNose:



    I have gained a fair amount of knowledge of the process from a site someone posted here not too long ago: http://www.taxidermy.net/forum/index.php
    Very Useful!

    Some folks like to put a sealant on the finished skull, but I don't know if we'll bother. Jury is still out on that one, so if any of the Pro's can lend some advise, (goes for the whole process as described btw) it would certainly be Right Appreciated!!

    I'll update this as we go along so you can see how the finished products turn out...

    Cheers,
    Nog
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  7. #6
    Join Date
    Apr 2005
    Location
    Langley BC
    Posts
    6,070

    Re: Skull Work

    looks great. Thanks for the details

  8. #7
    Join Date
    Jan 2012
    Location
    Victoria
    Posts
    294

    Re: Skull Work

    Thanks for the tips Iron Noggin, looks great!

  9. #8
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Thumbs up Re: Skull Work

    Polar Bear 1 is ready for final drying then assembly. Here he is sitting on top of a full sized Rubbermaid Roughneck container:







    This is one HUGE Bear! In fact, the largest I saw the entire time we lived in the Arctic. I do have the rest of the teeth, although many are cracked or broken due to the rigors of getting as old as this one did. Will post a couple more once he has been finalized...

    Cheers,
    Nog
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

  10. #9
    Join Date
    Oct 2006
    Location
    I'll just keep being..
    Posts
    3,026

    Re: Skull Work

    Nice work, looks good!
    "Our arrows will block out the sun!" "Then we shall fight in the dark!" K.L. Government is not the solution to our problem, it is the problem. R.R. “One of the great mistakes is to judge policies and programs by their intentions rather than their results.” M.F. https://www.youtube.com/channel/UClJ...fYFveARiWyqjQA

  11. #10
    Join Date
    Sep 2009
    Location
    Port Alberni
    Posts
    14,210

    Thumbs up Re: Skull Work

    Handful of the deer are now ready for de-greasing. Just got to get the rest out of their way!



    From left to right: Blacktail, Fallow, Bow Muley, Non-Typical Blacktail, Muzzleloader Whitetail.

    And on it goes...

    Cheers,
    Nog
    http://www.youtube.com/watch?v=zVNNhzkJ-UU&feature=related

    Egotistical, Self Centered, Son of a Bitch Killer that Doesn't Play Well With Others.

    Guess he got to Know me

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •