Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 2 3/4" For geese???

  1. #1
    Join Date
    Oct 2008
    Location
    Earth... Where else?
    Posts
    524

    2 3/4" For geese???

    Is a shotgun chambered in 2 3/4 going to be sufficient in hunting geese and duck? What should I have to consider if hunting waterfoul with this size cartridge. Thanks in advance for your info

  2. Site Sponsor

  3. #2
    Join Date
    Dec 2008
    Location
    Langley b.c.
    Posts
    1,618

    Re: 2 3/4" For geese???

    NO !!! Only a 3.5" chamber with black cloud shells will work. Anything else will bounce off.





    J/k if they are in range they will drop with the right choke and shot #.

  4. #3
    Join Date
    Jul 2009
    Posts
    9,436

    Re: 2 3/4" For geese???

    2-3/4" BB's and find the fastest ones you can. 3" and 3.5" are 1550fps i am sure the same is with 2-3/4". BUT pattern your gun with a few shells and whatever your gun patterns best with use that. BB's and 2's I wouldnt go any smaller.

    Easy awnser is yes your gun will do fine shoot 30yds and under and pattern your gun...........And above all post pictures and location to all your geese

  5. #4
    Join Date
    Mar 2009
    Location
    Nanaimo
    Posts
    433

    Re: 2 3/4" For geese???

    I hunt with a guy who only uses an old O/U chambered 2-3/4. He knocks em out of the sky all the time. Something to be said about shot placement. Think of it as a 300winmag to a mooses gut isnt going to drop him. But a .243 to a moose neck will make him fold.
    I support PETA!
    People Eating Tasty Animals!

  6. #5
    Join Date
    Feb 2009
    Location
    Prince George
    Posts
    233

    Re: 2 3/4" For geese???

    I come from Sask and have shot a lot of geese etc...and all my birds have been shot with a old 12 gauge Ithaca feather light 2 3/4 inch payed $50 from some guy in a yard sale but that was with lead shot, steel may be differant but back in the day I shot more geese with the that old gun than the guys with 3 inch and even one guy that had a 10 gauge that came with us one day so shot placement is more important than anything. Like some say its not the size of the stick it's the stick handler
    Last edited by trapperRick; 05-12-2010 at 02:51 PM.

  7. #6
    Join Date
    Jan 2009
    Location
    the land of naughty girls
    Posts
    524

    Re: 2 3/4" For geese???

    Absolutely, its just the size of the payload your sending. I never spend the money for 3 or 3.5 inch shells when I go waterfowling, 2 3/4 knocks em just as dead as 3.5 inch. Get em backwinging, and bust em up!!
    Life's like a jar of jalapenos, what you do today, might burn your arse tomorrow

  8. #7
    Join Date
    Mar 2006
    Location
    Enderby,B.C.
    Posts
    2,111

    Re: 2 3/4" For geese???

    My wife and I have shot piles of Saskachewan geese with 2 3/4" steel in a couple of old Model 12s,but we are shooting out of layout blinds over good decoys.I usually don't pull the trigger until I can actually see the goose's eye!That's close but the result is a dead bird and no cripples.We don't pass shoot. Gunner
    Support the BCWF, they volunteer to benefit all of us.

  9. #8
    Join Date
    Oct 2008
    Location
    Earth... Where else?
    Posts
    524

    Re: 2 3/4" For geese???

    Thanks to all for input it's always appreciated. I'm trying to decide which OU to buy and I've narrowed it down to the browning cynergy classic field in a 3" chamber, but I'm not fond of the grade 2 wood. or the cynergy euro sporting which has the grade 4 stock I like but is chambered in 2.75. So it looks like You've help me make my decision. Euro sport it is Thanks everyone and happy hunting

    Cheers, Matt

  10. #9
    Join Date
    Nov 2005
    Location
    Pemberton
    Posts
    1,791

    Re: 2 3/4" For geese???

    I agree with all the above Matt, and have taken many geese myself with a Rem 1100 chambered in 2.75 over the years.

    That being said if I was buying new, or even a new to me gun, I would buy at least someting chambered in 3 inch. I personally feel since we went to steel shot the 2.75 has lost a little thump. At least with a 3 inch you have some options.

    Just my 2 cents.

    Chad
    They laughed at my boots, laughed at my jeans, laughed when they gave me amphetamines
    Left me alone in a mean part of town, 36 hrs to come back down...am I the last of my kind?

  11. #10
    Join Date
    Dec 2004
    Location
    Port Alberni, B.C.
    Posts
    1,559

    Re: 2 3/4" For geese???

    Yep
    I guess Gilly has the right idea, get the 3".
    Personally I have no problem with the 2 3/4" I always hunt over Dekes and watch my range tho.
    The added versatility of the 3" is prolly a good idea.
    When I works, I works hard; when I sits, I sits loose; and when I thinks, I falls asleep.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •