Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Bow Building

  1. #1
    Join Date
    Mar 2004
    Location
    Burnaby
    Posts
    1,071

    Bow Building

    was thinking of getting into the art of building a recurve bow was just woundering if any one does it. If so were do you get your supplies from and any pointers be great.

  2. Site Sponsor

  3. #2
    Join Date
    Oct 2009
    Location
    6-13
    Posts
    220

    Re: Bow Building

    3riversarchery.com
    wrightarchery.com (Canadian)
    bowstick.com (not the greatest but, check out their "bowyers den")

    Hope this helps.

    Regards, Matt
    He who goes to bed with itchy bum, wakes up with smelly finger.

  4. #3
    Join Date
    Jan 2004
    Location
    Quesnel, BC
    Posts
    1,149

    Re: Bow Building

    If you are interested, I have a complete set of VHS tapes on bow building that I would be happy to pass along if you are interested.
    Chris H.
    Live to hunt, hunt to live!!!!!

  5. #4
    Join Date
    Oct 2009
    Location
    6-13
    Posts
    220

    Re: Bow Building

    also check out www.rudderbows.com
    they have bow building kits, and u-finish bows bows that are great for first timers. Good luck, and welcome to the addiction!

    regards, Matt.
    He who goes to bed with itchy bum, wakes up with smelly finger.

  6. #5
    Join Date
    Sep 2007
    Location
    Duncan, Vancouver Island
    Posts
    193

    Re: Bow Building

    You might find building a primitive longbow would be a good exercise before you head into anything more complicated.
    Just go down to the building supply at get a 1x2" piece of red oak as long as you are with as few grain run-outs as possible. Tim Baker made a winning flightbow out of kiln dried red oak so it's good stuff.
    Shouldn't cost more than $15 if you've got the tools and string material.

    -Grant

  7. #6
    Join Date
    Oct 2009
    Location
    6-13
    Posts
    220

    Re: Bow Building

    I agree fully with what Grant said aswell. Red Oak makes a fine bow if it has a good backing material. as it's great in compression but not great in tension.
    I Like Hickory as a backing for Red Oak Myself. Hickory is great in tension and the contrast between the dark Oak and Light Hickory Kind of gives it the look of a bow made of Yew wood.

    And it will cost you about 15 bux in Material! So if things go sideways(as the tend to on many a first attempt)on you, it won't break the bank.
    He who goes to bed with itchy bum, wakes up with smelly finger.

  8. #7
    Join Date
    Dec 2005
    Location
    1-1
    Posts
    3,175

    Re: Bow Building

    I don't know if you've seen this post but, I'm getting ready to attempt it again and plan on adding the fiberglass lamb..

    http://www.huntingbc.ca/forum/showthread.php?t=21585

    I can tell you I learned a lot during this build. Make sure
    you buy the right epoxy!!!
    Don't worry about a pandemic, stupidity is spreading way faster

  9. #8
    Join Date
    Jun 2004
    Posts
    2,313

    Re: Bow Building

    Hey 270 , look up Bingham Bow Suppies (add in Trad Bowhunt Mag) . A friend of mine did that with great results .
    Cheers

    P.S. they even provide tapered laminates .
    REMEMBER -- Keep Your Fingertab on --


    Group Memberships.

    Traditional Bowhunters of BC
    Abbotsford Fish and Game Club
    BCWF
    United Bowhunters of BC

  10. #9
    Join Date
    May 2010
    Location
    Alberta
    Posts
    3

    Re: Bow Building

    Have you considered a bow blank?
    Marc at Chek-Mate is now offering his new Beaver Creek longbow as a blank. Most of the hard part is done for you. I have more information in the Trad Review section at www.peteward.com where I just finished a review on these blanks.
    The blank is a good place to try your hand without needing a ton of equipment.
    Self bows are also a goodplace to cut your teeth and learn to tiller and shape handles.

    Pete

  11. #10
    Join Date
    Oct 2006
    Location
    Prince George
    Posts
    7,140

    Re: Bow Building

    hey Pete .. Good to see ya on the good side of the rocks ... wheres yer joke ...

    I might hafta check out one of them blanks

    been wanting to build one for a while ... just chikken of messing it up I guess
    A true Archery Nut

    Willing to help and answer archery related questions to the best of my ability ...all you gotta do is ask

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •