Where can I find the mould for casting my own sinkers for sturgeon fishing? Couldn't find anything with a Google search.
Where can I find the mould for casting my own sinkers for sturgeon fishing? Couldn't find anything with a Google search.
Last edited by r106; 07-18-2021 at 07:45 PM.
Originally Posted by lip_ripper00
Don't argue with an idiot, you will be dragged down to his level and beaten by experianceOriginally Posted by bearhunter338-06
Problem is easy to fix........Sell Chevy buy Dodge problem fixed..................
Site Sponsor
Pound the 16 and 20 oz. Round ones Flat.
Works great.
WSSBC
BCWF
CCFR
BHA
Originally Posted by lip_ripper00
Don't argue with an idiot, you will be dragged down to his level and beaten by experianceOriginally Posted by bearhunter338-06
Problem is easy to fix........Sell Chevy buy Dodge problem fixed..................
Hmm pretty sure I have a couple molds in the garage ?
If 8nterested I could look
Srupp
Berry’s bait has molds I don’t know if they have that one. I got mine on line do it molds
Make your own mold. I drilled a 1 1\4" hole in 1"X2" hinged square bar with a 1/8" hole for the wire in the bottom of the hole. Different depths = different weights. Mine was for halibut fishing in tidal zones. I spray with liquid graphite for easy release. I'll look for the mold and take a pic.
The challenge of retirement is how to spend time without spending money.
The worst day slinging lead is still better than the best day working.
Look around is there someone you can introduce to shooting because that’s the only way we will buck the anti gun trend sweeping Canada! "tigrr 2006"
Yep, gonna say we used to make our own. First ones we made the mistake of using rebar wire for the for the attachment point. Ended up being too soft and actually went to a bent spiral nail. Unfortunately I don't have any to show.
We never did use any release, as they were always 2 pcs and came apart easy.
I have even seen guys just use a 1" x 3/4" or like empty iron bar, cut to length, add wire, pour lead and leave them in the bar stock.
Flatter ones always seemed to hold better.