DIY Tent Woodstove

[boxhitch]

Looks like a repurposed welder cabinet maybe? Nice job, good project to build on

[one-shot-wonder]

Right on Harry, where did you get the 4" stove pipe from?

[HarryToolips]

Thanks everyone, and my little guy appreciates the comments!

[HarryToolips]

Nice Project but unless you modify it to be as Airtight as one wants in a Stove you will burn Wood like crazy, generate way to much heat for a short time and need to feed the Beast every 45 minutes and forget a good nights sleep. Been there done that.

Cheers

I hear ya...when I tested it out and closed the air intake, it seemed to burn a while....

[HarryToolips]

I like the 5 gallon formwork on the post. [ post saddle seems a little overkill ]

did you make the fire box or was it from something else? I recognize the cap as a wall vent. nice looking project.

Thanks....it was an old meter box from work that wasn't being used....

[HarryToolips]

Right on Harry, where did you get the 4" stove pipe from?

Thanks....from Home Depot......

[mike31154]

Any idea what kind of paint that is on the outside? I'd make sure to burn 'er good & hot a number of times outdoors to burn off anything nasty that might be in the paint.

[bcsteve]

That’s duct pipes, is that going to withstand the heat?

[Dannybuoy]

That’s duct pipes, is that going to withstand the heat?

Maybe , but I understand the fumes coming off it could be deadly . I would definitely burn it hot while outside... see how much it warps esp the door and burn the finish off the pipes . If that's ducting at the bottom it will melt and you will know

[GEF]

Beware! the burnt galvanizing of off the pipe will make you sick as well as the paint .You might want to get real stove pipe.Canadian tire has it