Why do the logging roads have the RR channel number posted but do not post the corresponding frequency?
Why do the logging roads have the RR channel number posted but do not post the corresponding frequency?
Site Sponsor
if it says RR 25, just set your radio to RR25
https://www.ic.gc.ca/eic/site/smt-gs...g/sf11127.html
Just make sure if you have boefangs to start it at 001, not 000, as is an option when you first get them, under CHIRP software.
RR1 = 001
If you don't, RR1 starts at 000 (which is a pain on the brain at times.)
Above post is great as it shows the frequency to put in before you go out and do it at home.
They were changed to make it "easy"
Yup gotta have all the frequencies pre programmed.
Google Radio road frequencies and you’ll find them all. So much easier than the old days of randomn channels and frequencies.
rr-1 150.080 rr-2 150.110 rr-3 150.140 rr-4 150.185 rr-5 150.200 rr-6 150.245 rr-7 150.260 rr-8 150.320 rr-9 150.365 rr-10 150.410 rr-11 150.440 rr-12 150.500 rr-13 150.530 rr-14 150.545 rr-15 150.560 rr-16 150.590 rr-17 150.680 rr-18 150.710 rr-19 150.770 rr-20 150.830 rr-21 151.010 rr-22 151.130 rr-23 151.190 rr-24 151.220 rr-25 151.310 rr-26 151.340 rr-27 151.370 rr-28 151.430 rr-29 151.460 rr-30 151.490 rr-31 151.520 rr-32 151.580 rr-33 151.610 rr-34 151.640 rr-35 151.670
Last edited by Bag1; 11-04-2019 at 11:09 PM.
Just make sure you program the frequency as "narrow"