Well, the axle is about an 1/4" offset to the drivers side with the stock track bar and the drop bracket. I put the BD diesel track bar in this am and didn't centre the axle as I didn't want to mess with the steering or allignment. It drives great, feels good, and was just aligned so I am trying to keep things simple
I didn't like the look of the bushing that had just been installed in the stock track bar, but they should still have been ok.
Drove the truck, and actually thought it was fixed until I hit a stretch of road with small potholes all over the place (paved) at about 80km/h and bang, death wobble. Not nearly as bad as before I replaced almost everything in the front end, but still terible.
I also had the tires balanced the other day hoping that would help, and found the front left out quite a bit. No joy, that didn't help either.
I really had hoped to not bring the truck to Vancouver, but I don't have many options left. Big Country or Baja North would be good options?