Page 3 of 13 FirstFirst 12345 ... LastLast
Results 21 to 30 of 130

Thread: Lets see your atv pull behind trailers

  1. #21
    Join Date
    Dec 2008
    Location
    Kelowna
    Posts
    864

    Re: Lets see your atv pull behind trailers

    Loaded it with a forklift and unloaded it with another quad. It was designed to carry a quad out of the bush if need be. The tires are also meant to be able to be taken off and put onto any Polaris quad if a spare is needed. Walking beams are definitely the way to go for hauling anything.

    heres a few more pics




    Last edited by knockturnal; 02-15-2014 at 09:40 AM.

  2. #22
    Join Date
    Dec 2008
    Location
    soon to be Yukon
    Posts
    4,012

    Re: Lets see your atv pull behind trailers

    Did you have to get different type of hubs to fit rims from trailer to quad?
    Quote Originally Posted by knockturnal View Post
    Loaded it with a forklift and unloaded it with another quad. It was designed to carry a quad out of the bush if need be. The tires are also meant to be able to be taken off and put onto any Polaris quad if a spare is needed. Walking beams are definitely the way to go for hauling anything.
    KEEP SHOOTING OR SHOOT A BIG GUN!!!!
    IF YOU DON'T HUNT YOU AINT RIGHT IN THE HEAD!!!!!!!!!
    A SCREAMING ELK THERE'S NOTHIN BETTER!!!!!!
    KNOW WHEN TO KEEP THE WIFE OUT OF MY HUNTING SPOTS !!!!!!!!!!

  3. #23
    Join Date
    Dec 2008
    Location
    soon to be Yukon
    Posts
    4,012

    Re: Lets see your atv pull behind trailers

    How about your hitch style over a regular type hitch , do u find it pulls better or just for loading stuff with the winch
    KEEP SHOOTING OR SHOOT A BIG GUN!!!!
    IF YOU DON'T HUNT YOU AINT RIGHT IN THE HEAD!!!!!!!!!
    A SCREAMING ELK THERE'S NOTHIN BETTER!!!!!!
    KNOW WHEN TO KEEP THE WIFE OUT OF MY HUNTING SPOTS !!!!!!!!!!

  4. #24
    Join Date
    Dec 2008
    Location
    Kelowna
    Posts
    864

    Re: Lets see your atv pull behind trailers

    The hubs were from princess auto. Just regular 5 bolt hubs meant for small trailers i suppose. We then cut out a dual bolt pattern on a piece of 1/4" steel. Countersunk the one side and cut the heads off the 5 bolts, welded them in place and sanded smooth. Then just bolted the polaris rims up into the remaining 4 holes. The hitch is built that way so you can go over rocks and logs and it wont hit on the hitch. Its also handy when you can use the winch cable to a pully and pull anything you want into the back with the use of the roller on the front. If you have 2 quads, chainsaw winch or a come-along, then you just use the clevis thats at the top of the hitch tube. The trailer is designed to tilt and the aluminium bites into the rear tire and locks it in places while the hauling starts. Its pretty much a dumbed down ebrake. We made the pendulum a little far back and sometimes, all depending on the load, you have to push down on the front and it drops into place.

  5. #25
    Join Date
    Jan 2007
    Location
    Williams Lake, BC Canada
    Posts
    14,168

    Re: Lets see your atv pull behind trailers

    hmmmm hi Colin..I had this made for me..each side is one piece of steel rolled with a lip and side all one piece = strong it does tilt with a pin to release..Used high floatation tires for big loads and soft ground the floor is wood so water can escape...and the rear tailgate is wood so can be slid out, and replaced..havnt used it in 4 years...


  6. #26
    Join Date
    Jan 2007
    Location
    Williams Lake, BC Canada
    Posts
    14,168

    Re: Lets see your atv pull behind trailers



    steven

  7. #27
    Join Date
    Jan 2007
    Location
    Williams Lake, BC Canada
    Posts
    14,168

    Re: Lets see your atv pull behind trailers



    steven

  8. #28
    Join Date
    Jan 2007
    Location
    Williams Lake, BC Canada
    Posts
    14,168

    Re: Lets see your atv pull behind trailers

    hmmm havnt used this ATV trailer in 4 years maybe time for a new home??

    cheers

    Srupp

  9. #29
    Join Date
    Jan 2010
    Location
    kamloops
    Posts
    3,260

    Re: Lets see your atv pull behind trailers

    Buddy built this one 16 years back

  10. #30
    Join Date
    Jan 2010
    Location
    kamloops
    Posts
    3,260

    Re: Lets see your atv pull behind trailers


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •