Re: Centre Shot
I little trick you can use if you don't have one of the several different centreshot tools is to use your stabilizer as a guide. your stab should run straight out from the bow so nock an arrow and look down on it from the top of the bow. If your centershot is bang on your arrow should run right down the stabilizer or at least parralell to the edge, if your arrow seems to be sitting at an angle across the stabilizer then adjust until it is straight.... this should get you close. That being said there is no substitute for the time savings and accuracy of a laser centreshot tool and a set of levels....they save me a ton of time!
Chris
"Do not go where the path may lead,
go instead where there is no path and leave a trail."
Emerson